SOLUTION OF: Determine the reactions on the beam shown in the figure below. The simply supported beam carries a point load at 2m from left pin support. The total length of the beam is 8m and it also carries an axial load of 50kN towards right.
Solution: Below is the solution of this support reactions in simply supported beam carrying an axial load problem:
SOLUTION OF: Determine the reactions on the beam shown in the figure below. The beam is a simply supported beam with 20kN load at mid point. Total length of beam is 4m.
Below is the solution of finding support reaction in simply supported beam with point load at middle:
Determine the stretch in each spring for equilibrium of the 2-kg block. The springs are shown in the equilibrium position.
Solution: Below is the solution file of this spring analysis problem in Statics and Mechanics. You may download the solution file.
SOLUTION OF: Determine the required length of cord AC in fig. 3-8a so that the 8-kg lamp can be suspended in the position shown. The unstretched length of spring AB is l’AR = 0.4 m, and the spring has a stiffness of kAB = 300 N/m.
Solution: Below is the solution file of this Cord and cable analysis problem in Statics. You may download the solution:
SOLUTION OF Problem: Three cables are joined at the junction right C. Determine the tensions in cables AC and BC caused by the weight of 30-kg cylinder.
Solution: Below is the Solution of this cable analysis problem in Statics and Mechanics.
SOLUTION OF: Find the load-bearing capacity as per Eurocode of a column loaded axially with the cross-section, as a complex section made of two C300 sections and two cover plates as shown below. The column is 6,00m high with pivots at the ends. Steel grade S355, strength fyd=355Mpa, E= 210Gpa.
Solution: Below is the solution in PDF format of this Eurocode-3 Buckling Problem. You may download the Solution file:
Find the moment of Inertia Ix and Iy of the shown C section. x and y are the axes passing through center of gravity of the C section
Solution: Below is the Solution of this Center of gravity and Moment of Inertia problem. You may download the solution:
Please find the coordinates of center of gravity x₀, y₀, of the composite section made of C180 and I200 Eurocode sections
Solution: Below is the Solution of this center of gravity problem. You may download the solution:
Please find the axial force in the following truss members, cut by the section α-α, using Ritter’s method.
Solution: Below is the solution of this Truss Analysis problem. You may download the solution file.
Please find the forces in members of the following truss in α-α section using Ritter’s Method
Solution: Below is the solution of this Truss Analysis problem, using Ritter’s method. You may download the Solution: